Trying on the Model

   After cutting the counters of pattern are pictured with a piece of chalk or a piece of dry soap. On the details of cover there must be the lines of the middle of the front and the back widths, he lines of pockets’ slots and other elements of model. The pattern of a pencil skirt is removed; all the counters lines are transferred from one detail on the other one or symmetrical side of detail if it has been cut along the fold of the cloth. Along the construction lines the running stitches are passing, because the marked lines can disappear during the processing. Then tacks and side cuts are running up according to the marked counter, folding the details with faced sides inside. If a zipper is planned to be in the left side seam, then the cut are not tuck in of 12-16 cm. To the top cut a corsage or a belt is run up. The bottom of the slim pencil skirt is also tucked in and made a try. While trying the skirt on a designer should see how the skirt is fit the figure. At this time you must be in good spirits and feel nice. To fix the pencil skirt the designer stuck it to your underwear in the front and in the back. The length and width, the place of pockets, belts and other details of the skirt are corrected during the try. It depends on the model of the skirt and your taste. All the defects and mistakes are removed during the correction of the skirt. For the longevity of the skirt all the cuts are overcast with cotton or silk threads using a machine or making it with hands. Great attention is taken to seams surely. Tacks are playing the important role in the item. With the help of tucks the slim pencil skirt looks much more elegant and attractive. It is made along the form of a person. Very often the tucks can perform a decorative function in clothes. The tucks are distinguished according to sight and the way of treating them. They may be plain, fold, cut and pin-tuck. The sewing usually is going to start with the treating of tucks. Then they are ironed to both sides. For example, if you have the thin cloth, the tucks are ironed into the middle of the width; if the cloth is thick, then the tucks are split into both sides, ironed and cut. The seam depends on the depth of the tack.